Frühere Suchanfragen

Keine früheren Suchanfragen

Suchoptionen

Nur verfügbar, wenn angemeldet.
sueden.social ist einer von vielen unabhängigen Mastodon-Servern, mit dem du dich im Fediverse beteiligen kannst.
Eine Community für alle, die sich dem Süden hingezogen fühlen. Wir können alles außer Hochdeutsch.

Verwaltet von:

Serverstatistik:

1,8 Tsd.
aktive Profile

sueden.social: ÜberStatusProfilverzeichnisDatenschutzerklärung

Mastodon: ÜberApp herunterladenTastenkombinationenQuellcode anzeigenv4.4.3

#3dprinting

299 Beiträge199 Beteiligte32 Beiträge heute
Koz Ross

Some Dungeon Blocks terrain I've been printing. I used a 0.1mm layer height modifier for the top parts (thanks @amd for teaching me about that!), but forgot to apply it on some of the tiles. Really shows too.

These prints were done in ABS, and despite this being the cheapest, garbagiest ABS I can buy, the K1 Max (plus all mods) handled it well.

@3dprinting

#3DPrinting#FDM#Terrain
Xyphoid process

Printed out some brackets, so I could add some 92mm fans I had lying around. Had to replace a disk, because of some checksum errors. Still resilvering. Replaced disk s.m.a.r.t. values are ok, so maybe it was just a cable problem (should've checked that first). And on top of that the case fell on my knee when I tripped on the power cable. Bruised ego and knee... #3DPrinting #FML #TrueNAS

M4x

Hey @octoprint ,

I'd like to thank you for your amazing work!❤️
I'm currently using a CoreXY printer I've build myself (before #voron was a thing). Of course I'm using it together with #octoprint . I'm thinking about replacing it. It seems to me like the consumer focused industry finally comes up with usable CoreXY printers. Researching the market makes me wonder if octoprint is experiencing a drift towards the usage of #klipper or #closedsource solutions (cloud). Would be a shame!

#3dprinting
Dennis

Both relieved and annoyed that my latest Aliexpress filament order was canceled. Tremendous pricing ($8/kg), but eh… did I really need another 10 kg right now? #3DPrinting

*
Trevor

The prototype #TRON identity disc is looking better than I had hoped. I think once I get some aluminum tape to cover the inside, we'll get more consistent light transmission from the ring out through the outer ring.

I goofed on one thing though. Since this is eye-searingly bright on 5V, I thought I can just use 3 rechargeable AA batteries in series, give it 4.5V, and get a marginally less-bright light, which would be a very easy solution. Only there isn't enough room in here for AA batteries, or at least it will be VERY cramped. And pretty heavy for the little. Whoops. An obvious boo-boo, in hindsight. Fortunately it seems like AAAs, with the same voltage, will fit just fine. I'll start laying that out tonight.

Also, this makes a pretty nice light feature when it's plugged into USB! And a very pleasant night-light for the little as well. I think after the Halloween push is over, I'll make a couple for myself that are meant to be lamps or light features. One black one, and the white disc from TRON: Uprising.

I was planning to have just an on/off button right now but I might go ahead and model buttons for all four controls on the scavenged ring light control board (on/off, cycle colour temp, brightness up, brightness down).

Moving in the right direction. I didn't have time to try cutting & rewiring the EL tape and panels. Maybe Thursday I'll have the time to sit and dedicate some time to it.

#TRONtober#maker#propmaking
AngesagtLive-Feeds
Über